About Us
// Henan Shengruida New Material Technology Co., Ltd.
Henan Shengruida New Material Technology Co., Ltd. is close to the two main railway lines of Longhai and Beijing-Guangzhou, and is two moments away from the Zhengzhou-Europe International Railway Freight Train and Zhengzhou Xinzheng International Airport. The transportation is very convenient and provides unique transportation conditions for the company's products to be sold to domestic and international markets. The company mainly produces high-quality AZS-33# fused zirconium corundum brick, AZS-36# fused zirconium corundum brick and AZS-41# fused zirconium corundum brick and other series of refractory materials.
Company Creation
Registered capital
Company staff
Product
// Top pressure, corrosion resistance, high temperature resistance
Oxidation melting casting AZS33#
AZS-33# wrong corundum brick dense microstructure makes the brick glass erosion resistance is good, not easy to produce stones or other defects, and the possibility of small bubbles is also very low.
Oxidation melting and casting AZS36#
In addition to having the same cojunction as AZS-33# wrong corundum brick, AZS-36# wrong corundum brick has a lower glass phase content due to the increase of more chain-like oxidized diamond crystals.
Oxidation melting casting AZS41#
AZS-41# wrong corundum brick contains more uniform distribution of oxidized aluminum crystal, in the drill corundum series, its erosion resistance is the best.
Corundum mullite brick has excellent high temperature mechanical properties and thermal shock stability, widely used in sulfur combustion furnace, waste heat boiler tail gas combustion furnace and other petrochemical equipment.
No shrinkage cavity casting code is WS, quasi-no shrinkage cavity casting code is ZWS, inclined casting code is QX, dense casting code is MS, and ordinary casting code is PT
Zirconium ramming compound is a kind of unshaped refractory material, which is composed of fused corundum aggregate particles and a small amount of additives.
Cooperation cases
AZS melting and casting brick manufacturing process will be selected zircon sand and industrial alumina powder according to 1:1, plus a small amount of Na2O (added in the form of sodium carbonate), B2O3 (added in the form of boric acid or borax) flux, mixed evenly, after 1800~1900 ℃ melting after casting molding, can be prepared containing ZrO2 33% melting and casting brick. On this basis, the fused-cast brick containing ZrO2 36% ~ 41% can be prepared by using partially desiliconized zircon sand as raw material. Zirconium corundum brick (Zirconia- corundum refraetory brick) uses industrial alumina powder and selected zircon sand as raw materials to make refractory products with ZrO2 content of 33% ~ 45%. Zirconium corundum bricks are mainly used in glass industrial tank kilns.
Address: Gou Tang Village, Gou Tang Town, Xinmi City, Zhengzhou City, Henan Province
Telephone: 86-371-63136888
Mobile:+8613607657856
Copyright©2023 Henan Shengruida New Material Technology Co., Ltd.